Friday, January 29, 2010

Mold Spray Concrobium How To Get Rid Of Mold On Bathroom Ceiling?

How to get rid of mold on bathroom ceiling? - mold spray concrobium

Yesterday I bought a spray. It Concrobium mold control, it is understood that very well. The only problem is that it is an aerosol. He says to spray the area and overnight. Well, I sprayed the area and seeps everywhere. How do I do that? I thought that if injected, remain in the points. I do not want a mess all over the bathroom.

5 comments:

  1. The chlorine and water in an old Windex spray bottle. Spray the roof with a clean cloth or an old towel. Painting the roof with paint semi-gloss oil with additive mildew resistant.

    ReplyDelete
  2. You can spray the solution onto a cloth and wipe the area, but I always used bleach for mold problems. about 3 / 4 cups to a gallon of water. Clean and in the previous case, let dry. Is the fan working? Or a window left open so that moisture can dissipate? If so, is the finding of a leaking roof, mold should not be there.

    ReplyDelete
  3. I like to use rubber gloves and a sponge or sponge mop into the solution. The beach is mixed with water. You can also use glasses or something to protect your eyes while applying the ceiling.

    If you are in the color after you remove the mold, so that a package of material to be mixed in color, is to get mold.

    ReplyDelete
  4. Put bleach on a painting by Pan and relax with a painting
    . roll To minimize the disaster. Good luck with your
    Project.

    ReplyDelete
  5. two words .. Bleach water ... Everything I heard said that only the areas that spray, let dry, then .. with oil paint primer That makes him keep should be removed.

    ReplyDelete